Premier NorthWest Locksmith Portland

Wrangler Lockout Service

As a professional locksmith technician you never know what would be expected once you go on the road for a job. There were many times where I found myself going for a job only to get 3 more while I was on my way. Usually this is not an issue, but when things do not run smoothly, then the problems usually start as other customers will be waiting for the service.Normally I would run behind if I would get stuck on a job that may be difficult to find a solution for more than expected.

About few weeks ago I remember heading out for a job in the morning and getting few more jobs along the way which was the reason for me to come back home only in the evening. The first job was making a key for a 2005 Ford Escape in Hillsboro which went fairly smooth as expected. I got to the customer's home fairly quick since there was no traffic and was able to make a new key for the customer in a timely manner. The only issue I had was the power supply in my service van which did not work properly and eventually led me into connecting the key cutting machine power supply to the customer's garage.

While I was close to finishing the Ford Escape key origination job, I got another call from a customer who locked herself out of her vehicle at her place of work parking lot. The vehicle was an old Jeep Wrangler, so I knew I was into a challenge. The lockout service was in Mcminville which was around half an hour from where I was. I took the customer info and started heading on the way to try and avoid traffic.

In about half an hour I was able to get to the job site. After taking the information I needed from the customer, I grabbed my lockout service tools from the van and started working on the vehicle. The problem with the Jeep wrangler was the fact that the door frame was very tough to separate using the wedges, but even after I was able to create some space, it was not enough for me to maneuver with the bar in order to unlock the door using the power locks. Mean time, I got another lockout job on Forest Grove which was on my way back anyways, so I booked it even though I was still working on the Jeep.

After about 15 minutes of unlocking attempts, I decided that the best way to get the customer back to her vehicle was to making a new key for the customer which wasn't a big deal, but I had to charge the customer a little more for it. After explaining the situation to the customer, I got the green light to make a key which worked well for her since now she had a spare key in case a situation such as that will occur again.

Visit the following links for information about our Portland locksmith services. | Premier NorthWest Locksmith Portland.    

Exit Devices Services

See full list on Listly

VATS System Decoding

For the average locksmith technician, originating a new key for a vehicle should be a fairly simple task. Most of the time, it will depend on several reasons such as duplicating a key from the original or making one from scratch, anti-theft security systems and more. Before transponder type keys were new in the market, domestic company such as GM came up with their own version of incorporating an anti-theft security feature within their ignition keys which called VATS system. The VATS system was actually a chip built in the key blade which function similarly to a transponder key. Originating a key for a GM vehicle equipped with a VATS system required a locksmith technician to have a VATS decoder in order to make a key for the vehicle.

I remember many years ago when the VATS system was fairly new I got a call from a customer who wanted us to make a spare key for his 1990 Corvette. At that time most of us were using VATS system decoders which made the job a lot easier making a key for VATS system equipped vehicles. Figuring it should not take long since I had in stock VATS system key blanks and the decoder, I accepted the job, took the customer's information and was heading his way.

Once I got to the customer's address, I tool all the necessary information from him on the vehicle and the keys, so I could start doing the work. As I got my VATS system decoder out, I noticed that it wouldn't want turn on. I figured it was just a power issue, but even after trying to resolve it, I wasn't able to turn it on. Since I didn't know another way to decode VATS system values back then, I called another Portland locksmith technician friend of mine for advice.

After getting my friend on the phone, he mentioned there was another way to decode these VATS system keys which involved using an  OHM meter. Luckily I had one with me. He mentioned that the way to check the VATS system values with the OHM meter was putting each probe on a different side of the VATS system chip on the key. However, that was not the end of it. Because the values given by the OHM meter did not actually reflected the VATS system values, my friend actually gave me a conversion chart to work with which would have given me the correct VATS system number based on the value I would get from the OHM meter. Once I completed the process on the customer's key, I able to quickly find the correct VATS system number, cut the new key and tested it successfully.

Residential Broken Key Extraction

See full list on Listly

Infinity Trunk Lockout

Automotive lockout services are the most common services a locksmith technician will do throughout his or her time in the business. Keeping track of all different tools and ways to unlock different make and models is no easy. I found that most vehicles, are not that hard to open if you have the right tools and experience to do the job. However, some vehicles would seem to be harder to open than others which can be for many reasons such as higher security lock mechanisms, worn out lock components, or others.

A while back, I got a call from a customer who owned a Q45 Infinity and accidentally locked the keys inside the trunk after coming back from shopping. Apparently, he dropped the keys inside the trunk as he was putting the bags inside the trunk and closed it. When I got to the customer's location, I did a quick review of the situation and realized I would have to either pick the trunk lock, or access the trunk release lever by unlocking the driver side's door. What I didn't know was the fact that trunk release lever was not where I thought it would be which is next to the driver's side seat.

As my first option, I decided to try and pick the trunk lock. It was a high secure locking mechanism which made it hard picking it open which made me give up after few minutes of trying. I then turned to my air wedges in an attempt to unlock the driver side door and access the trunk release lever. It didn't take long to unlock the vehicle's door, but as I got the vehicle's door opened, I searched and could not find the trunk release lever. When I asked the customer, he said he never used it before and had no idea if there was one.

At that point I figured I should probably call one of my Portland locksmith technician friends for advice on the situation since I ran out of ideas. When I got one of my locksmith friends on the phone he recalled that there was in fact a trunk release in this type of vehicle and that I would find it in the glove compartment. I immediately finished the conversation and wen for the glove compartment. Unfortunately it was locked. However, I knew that the lock mechanism in there would not be as tough to pick as the one in the trunk or the door, so I went ahead and started working on it. Withing couple of minutes, I got the glove box compartment opened, used the trunk release to pop the trunk, and get the customer back his keys.  

Automotive Lockout Services

See full list on Listly